メインコンテンツにスキップ

Reemplazo del conjunto de LCD de iPad Mini CDMA

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての42個のガイドに反映されます。

英語
スペイン語

手順 7を翻訳中

手順7
iPad Mini CDMA LCD Assembly Replacement: 手順 0、 2の画像 1 iPad Mini CDMA LCD Assembly Replacement: 手順 0、 2の画像 2
  • The LCD is glued to the metal LCD shield plate behind it along the top, left, and right edges. In order to safely loosen this adhesive, you'll be using a guitar pick to shift the LCD a couple of millimeters left and right several times.

  • Insert a guitar pick into the gap between the LCD and rear case, near the top of the left side of the LCD.

  • Bend the pick slightly away from the iPad, just enough to spread the gap between the LCD and rear case.

El LCD está pegado a la protección de metal del LCD que esta atrás de el a lo largo de los bordes superior, izquierdo y derecho. En orden para aflojar este adhesivo, estarás usando un plumilla para mover el LCD unos milímetros de izquierda a derecha varias veces.

Inserte una plumilla en el hueco entre el LCD y la carcasa trasera, cerca del lado izquierdo superior de la LCD.

Dobla la púa un poco, lo suficiente para hacer el hueco entre el LCD y la carcasa trasera más grande.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります