メインコンテンツにスキップ

iPad Mini CDMA LCD Austausch

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての42個のガイドに反映されます。

英語
ドイツ語

手順 7を翻訳中

手順7
iPad Mini CDMA LCD Assembly Replacement: 手順 0、 2の画像 1 iPad Mini CDMA LCD Assembly Replacement: 手順 0、 2の画像 2
  • The LCD is glued to the metal LCD shield plate behind it along the top, left, and right edges. In order to safely loosen this adhesive, you'll be using a guitar pick to shift the LCD a couple of millimeters left and right several times.

  • Insert a guitar pick into the gap between the LCD and rear case, near the top of the left side of the LCD.

  • Bend the pick slightly away from the iPad, just enough to spread the gap between the LCD and rear case.

Das LCD ist an der metallen LCD Abschirmung dahinter entlang am oberen, linken und rechten Rand verklebt. Um es sicher abzulösen, musst du mit einem Gitarrenplektrum das LCD einige Male ein paar Millimeter nach links und rechts verschieben.

Setze das Plektrum in den Spalt zwischen LCD und rückseitigen Gehäuse, in der Nähe der oberen linken Kante des LCD.

Biege das Plektrum leicht weg vom iPad, gerade so viel um den Spalt zwischen LCD und Gehäuse zu vergrößern.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります