メインコンテンツにスキップ

Disconnessione batteria MacBook Pro 15" Touch Bar fine 2016

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての8個のガイドに反映されます。

英語
イタリア語

手順 1を翻訳中

手順1
MacBook Pro 15" Touch Bar Late 2016 Battery Disconnection: 手順 0、 2の画像 1 MacBook Pro 15" Touch Bar Late 2016 Battery Disconnection: 手順 0、 2の画像 2
  • Peel up and remove the large rectangular battery board cover, on the edge of the logic board nearest the battery.

  • If the cover doesn't peel up easily, apply mild heat with an iOpener, hair dryer, or heat gun to soften the adhesive underneath, and try again.

  • If the cover doesn't seat securely during reassembly, try rotating it 180 degrees. It must be oriented correctly in order for the adhesive pads underneath to contact the board screws.

Solleva e rimuovi la grande cover rettangolare della scheda della batteria, sul bordo della scheda logica dalla parte più vicina alla batteria.

Se la cover non si stacca facilmente, applica una modesta quantità di calore con un iOpener, un asciugacapelli o una pistola termica per ammorbidire l'adesivo sottostante e prova di nuovo.

Se la cover non rientra perfettamente nella sua posizione in fase di rimontaggio, prova a ruotarla di 180°. Deve essere orientata in modo corretto per far sì che i pad adesivi sottostanti entrino in contatto con le viti della scheda.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります