注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。
手順 1を翻訳中
手順1
-
Take out the twelve 3.5mm screws using the Phillips #00 screwdriver.
-
Remove the one 3 mm Phillips #00 screws.
-
Remove the two 1mm Phillips #00 screws.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。