メインコンテンツにスキップ

iPod Touch 第5世代のフロントパネルの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 1を翻訳中

手順1
iPod Touch 5th Generation Front Panel Replacement: 手順 0、 3の画像 1 iPod Touch 5th Generation Front Panel Replacement: 手順 0、 3の画像 2 iPod Touch 5th Generation Front Panel Replacement: 手順 0、 3の画像 3
  • If your display glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping the glass.

  • Lay overlapping strips of clear packing tape over the iPod's display until the whole face is covered.

  • This will keep glass shards contained and provide structural integrity when prying and lifting the display.

  • Wear safety glasses to protect your eyes from any glass shaken free during the repair.

ディスプレイガラスが飛散している場合は、さらに広がらないようにガラス上にテープを貼ってください。

透明な梱包用テープをiPodのディスプレイ上に貼り、ディスプレイ表面全体を覆います。

この作業により、ディスプレイを持ち上げてこじ開けた際に、ガラスの構造を保つことができます。

ガラスが顔に直接当たらないように、保護メガネを装着してください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります