メインコンテンツにスキップ

iPod Touch 第5世代 ボタンリボンケーブルの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 5を翻訳中

手順5
iPod Touch 5th Generation Button Ribbon Cable Replacement: 手順 0、 2の画像 1 iPod Touch 5th Generation Button Ribbon Cable Replacement: 手順 0、 2の画像 2
  • Use a plastic opening tool to pry the microphone up from the rear case.

  • The ribbon cable attached to the microphone may be under a long strip of foam insulating tape. Remove this tape and retain it for reassembly before prying up the microphone.

プラスチック製開口ツールを使って、リアケースからマイクを持ち上げます。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります