メインコンテンツにスキップ

iPod Touch 第五代 主板更换

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての9個のガイドに反映されます。

英語
中国語

手順 1を翻訳中

手順1
iPod Touch 5th Generation Logic Board Assembly Replacement: 手順 0、 1の画像 1
  • Flip the logic board assembly back over to expose the connectors on the back.

  • Use the edge of a plastic opening tool to gently pry the antenna connector off the back of the logic board.

  • This cable is very delicate; be careful not to stress the point where it connects to the antenna.

将主板翻转过来,以露出背面的连接器。

使用塑料撬棒的边缘轻轻地将天线接线从主板的背面撬开。

这根接线非常细。 注意不要对连接天线的位置施加压力。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります