メインコンテンツにスキップ
英語
日本語

手順 7を翻訳中

手順7
Next, fold the ribbon out of the way that is covering the SSD and remove the SSD retaining screw. Now gently pry up on that same end until it lifts off the sticky thermal pad underneath. It doesn't take much. Once you are clear of the pad you can pull the SSD out of it's M.2 socket. Now install your new SSD and secure it with the retaining screw.
Remove Old SSD
  • Next, fold the ribbon out of the way that is covering the SSD and remove the SSD retaining screw.

  • Now gently pry up on that same end until it lifts off the sticky thermal pad underneath. It doesn't take much. Once you are clear of the pad you can pull the SSD out of it's M.2 socket.

  • Now install your new SSD and secure it with the retaining screw.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります