メインコンテンツにスキップ
英語
日本語

手順 3を翻訳中

手順3
Now remove the 13 Philips 0 screws marked in yellow . Make sure you only remove the screws that are circled. There are a few that are not circled and do not need to be removed. Next remove the 6 T5 Torx screws  circled in orange
Screws, Screws, Screws
  • Now remove the 13 Philips 0 screws marked in yellow .

  • Make sure you only remove the screws that are circled. There are a few that are not circled and do not need to be removed.

  • Next remove the 6 T5 Torx screws circled in orange

  • flip the laptop over and you are going to gently pry the hinge cover off.

  • Once loose, carefully disconnect the 2 cables marked in yellow that are attaching it to the motherboard.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります