手順 5を翻訳中
手順5
Remove Plastic Plate
-
Insert a spudger along the edge of the plastic plate on the top shell. Pry up gently until the glue releases. There is a large glue pad under this plate, but there is nothing else holding it on.
-
After prying off the plate, there are four screws marked in the rings to release the back plate from the screen plate.
-
Once the screws are removed, lift off the back plate to reveal the screen and plastic trim.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。