メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

英語
日本語

手順 2を翻訳中

手順2
When the glass is warm to the touch, apply a suction cup close to the edge. Lift on the suction cup and insert an opening pick in the gap. If your back glass is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. You can also superglue the suction cup to the broken screen.
  • When the glass is warm to the touch, apply a suction cup close to the edge.

  • Lift on the suction cup and insert an opening pick in the gap.

  • If your back glass is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. You can also superglue the suction cup to the broken screen.

  • If the edge of the glass is cracked, you can try to slide an opening pick underneath the crack and slowly chip the glass out.

  • Reapplying heat will help loosen adhesive and make the process easier.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります