メインコンテンツにスキップ

Démontage du réveil Philips HF3531xx

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

手順 1を翻訳中

英語
フランス語
手順1
Philips Wake-Up HF35xx Disassembly, Start: 手順 0、 3の画像 1 Philips Wake-Up HF35xx Disassembly, Start: 手順 0、 3の画像 2 Philips Wake-Up HF35xx Disassembly, Start: 手順 0、 3の画像 3
Start
  • There is a screw under the shiny UL sticker. Remove the sticker or pierce it to unscrew and remove this bottom panel.

  • There are two tabs holding the panel into the back of the clock/light. If the panel does not come out easily, gently wiggle a flat-blade screwdriver or spudger in the grill next to where the screw was to loosen it.

Il y a une vis sous l'étiquette UL brillante. Retirez l'étiquette ou percez-la pour dévisser et retirer le panneau du fond.

Deux languettes maintiennent le panneau à l'arrière de l'horloge/de la lampe. Si le panneau ne se détache pas facilement, faites glisser doucement un tournevis à lame plate ou un spudger dans la grille à côté de l'endroit où se trouvait la vis pour la desserrer.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります