メインコンテンツにスキップ

Démontage du réveil Philips HF3531xx

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

手順 3を翻訳中

英語
フランス語
手順3
Philips Wake-Up HF35xx Disassembly, Remove the button ring: 手順 0、 3の画像 1 Philips Wake-Up HF35xx Disassembly, Remove the button ring: 手順 0、 3の画像 2 Philips Wake-Up HF35xx Disassembly, Remove the button ring: 手順 0、 3の画像 3
Remove the button ring
  • We can finally unscrew two more Philips head screws to remove the button ring.

  • Tip: Lift one end of the ring, tilting it toward the back of the alarm clock. That will get the hooks out from under the rear rim so you can start removing it..

Vous pouvez maintenant dévisser deux vis Philips de plus pour retirer l'anneau des boutons.

Astuce : Soulevez une extrémité de l'anneau et inclinez-la vers l'arrière du réveil. Cela permettra de faire sortir les crochets de sous le bord arrière et de pouvoir commencer à le retirer.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります