Dim Blue LED on Skullcandy Hesh 2 Wireless

英語

日本語

手順 3を翻訳中

手順3

Covering LEDs

On the bottom left of the board, near the power button, are LED0 through LED3. The odd numbered LEDs are blue, and the even numbered LEDs are red.
With the sharpie, carefully mark the tops of the LEDs. Alternatively, if you want to black out the lights entirely, use very small pieces of electrical tape to cover them.
It's a good idea to verify the color of each LED by powering on the headset while it's open.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。