修理を始めるには コミュニティ ストア

iPhone XR Lower Speaker/하단 스피커 교체

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

ガイドに戻る
英語
韓国語
前の手順

手順 10を翻訳中

手順10
iPhone XR Lower Speaker Replacement: 手順 0、 2の画像 1 iPhone XR Lower Speaker Replacement: 手順 0、 2の画像 2

  • Remove the speaker.

  • The speaker's adhesive gasket is not reusable. Peel away any remaining adhesive residue with tweezers.

  • To help protect against water and dust intrusion, replace the adhesive gasket during reassembly. Prep the area by cleaning it with a bit of isopropyl alcohol and a lint-free cloth or coffee filter so that the gasket adheres properly. Install a new gasket onto the speaker, and then install the speaker.

스피커를 분리하십시오.

스피커의 접착 개스킷은 재사용할 수 없습니다. 핀셋으로 남은 접착제를 벗겨주십시오.

물과 먼지의 침입을 방지하려면 재조립시 접착 개스킷을 교체하여 주십시오. 개스킷이 제대로 부착되도록 약간의 isopropyl/이소프로필 알코올과 보풀이 없는 천 또는 커피 필터로 닦아주십시오. 스피커에 새 개스킷을 설치 한 다음 스피커를 설치하십시오.

[* black] Remove the speaker.
-[* icon_reminder] The speaker's adhesive gasket is not reusable. Peel away any remaining adhesive residue with tweezers.
+[* icon_reminder] The speaker's adhesive gasket is not reusable. Peel away any remaining adhesive residue with [product|IF145-020|tweezers].
[* icon_reminder] To help protect against water and dust intrusion, replace the adhesive gasket during reassembly. Prep the area by cleaning it with a bit of isopropyl alcohol and a lint-free cloth or coffee filter so that the gasket adheres properly. Install a new gasket onto the speaker, and then install the speaker.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。