iPod Nano 4th Generation Battery Replacement

英語

オランダ語

手順 1を翻訳中

手順1

Peel the hold switch cable from along the edge of the battery and lay it aside. The hold switch cable is not attached to the battery.
The battery is held on to the logic board by a strong adhesive. Force may be required to remove the battery from the logic board.
Pry the battery off the adhesive securing it to the metal tray on the logic board.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。