注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。
手順 4を翻訳中
手順4
-
Use the point of a spudger or fine tweezers to gently pry the antenna cable connector straight up off its socket on the logic board.
- | [* black] Gently pull the cable or use the point of a spudger to lift its connector straight up off its socket on the logic board. |
---|---|
- | [* icon_reminder] To reconnect the cable, use tweezers to position it carefully over its socket on the logic board, and then press it down firmly until it snaps into place. |
+ | [* icon_caution] The antenna cable connector and socket are fragile. |
+ | [* black] Use the point of a spudger or fine [product|IF145-020|tweezers] to gently pry the antenna cable connector straight up off its socket on the logic board. |
+ | [* icon_reminder] To reconnect the cable, use tweezers to position it carefully over its socket on the logic board, and then press it straight down until it snaps into place. |
[* icon_reminder] If you need more slack in the cable, you can temporarily pry it from the clips securing it to the antenna plate. |
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。