メインコンテンツにスキップ

Mac mini Late 2018 Antenna Plate Replacement

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
韓国語

手順 3を翻訳中

手順3
Mac mini Late 2018 Antenna Plate Replacement: 手順 0、 2の画像 1 Mac mini Late 2018 Antenna Plate Replacement: 手順 0、 2の画像 2
  • Use a T6 Torx driver to remove the 2.8 mm screw securing the antenna cable to the Mac mini's logic board.

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります