手順 6を翻訳中
手順6
-
With the pins removed the valve body can be pulled out.
-
If you wish to further disassemble it you can unscrew the section shown.
-
This can be done by taking a long flat piece of metal and use it like a flat head screw driver. The best way to hold the other half is with a vice. Try to avoid using anything that will leave a mark or bend the metal.
-
Once the cap piece has been removed the following piece can be found inside.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。