メインコンテンツにスキップ

Déconnexion prises USB-C et jack MacBook Retina 2016

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての22個のガイドに反映されます。

英語
フランス語

手順 4を翻訳中

手順4
Retina MacBook 2016 USB-C and Audio Jack Disconnect: 手順 0、 2の画像 1 Retina MacBook 2016 USB-C and Audio Jack Disconnect: 手順 0、 2の画像 2
  • Disconnect the audio jack board ribbon cable by pulling it straight back out of the ZIF connector.

  • During reassembly, orient the ribbon cable so the white stripe faces you. Insert the cable until the white line disappears under the socket.

  • At this point it is possible to open the macbook all the way and to lay it flat on a table without causing any damage to the flex cables.

Déconnectez la nappe de la puce prise jack en la tirant tout droit hors du connecteur ZIF.

Durant le réassemblage, orientez la nappe de sorte que le côté avec la bande blanche soit vers vous. Insérez-la jusqu'à ce que la ligne blanche disparaisse sous le connecteur.

À ce point, il est possible d'ouvrir entièrement le MacBook pour le poser sur une surface plane sans endommager de nappes.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります