メインコンテンツにスキップ

iPhone XR 분해도

英語
韓国語

手順 6を翻訳中

手順6
iPhone XR Teardown: 手順 0、 3の画像 1 iPhone XR Teardown: 手順 0、 3の画像 2 iPhone XR Teardown: 手順 0、 3の画像 3
  • On the way to freeing up the logic board, we're encountering a veritable plethora of standoff screws. We're used to one or two per iPhone, not X ten.

  • Luckily, we're armed and ready.

  • What's this? A modular SIM card reader! That's an iPhone first.

  • Not only does this mean quick swaps of a dead SIM reader, it also reduces the cost of replacing your logic board! Win-win!

  • This is likely a concession to the Chinese market, where eSIM is not supported—so in order to enable dual-sim functionality on Chinese models, Apple installs a dual Nano-SIM reader. The modular approach makes this much easier than it would be if the reader were soldered to the main board, as in past models.

  • The svelt, non-elbowed, single-decker logic board is now free to escape!

로직 보드를 분리하는 과정에서 우리는 엄청난 양의 대치 나사를 풀어야합니다. 우리는 iPhone 한 개당 1-2개 정도에 익숙합니다, 10개는 아닙니다.

다행히도, 우리는 무장 및 준비되어 있습니다.

이것은 무엇입니까? 모듈식 SIM 카드 판독기입니다! iPhone에 처음 입니다.

이 뜻은 수명이 다 된 SIM 리더를 빨리 교체할 뿐만 아니라 로직 보드 교체 비용을 줄입니다! 윈-윈, 모두에게 유리합니다!

이는 아마도 eSIM을 지원하지 않는 중국 시장에 대한 양보일 수 있습니다—따라서 중국 모델이 dual-sim 기능을 사용하게 하려고 Apple은 dual Nano-SIM 리더를 설치하였습니다. 모듈식 접근은 이전 모델처럼 리더가 메인 보드에 납땜한 경우보다 훨씬 수월하게 만듭니다.

svelt, non-elbowed, single-decker 로직 보드는 이제 자유롭게 분리될 수 있습니다!

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります