メインコンテンツにスキップ

iPhone XS Max 耳机扬声器和前传感器组件更换

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
中国語

手順 8を翻訳中

手順8
iPhone XS Max Earpiece Speaker and Front Sensor Assembly Replacement: 手順 0、 3の画像 1 iPhone XS Max Earpiece Speaker and Front Sensor Assembly Replacement: 手順 0、 3の画像 2 iPhone XS Max Earpiece Speaker and Front Sensor Assembly Replacement: 手順 0、 3の画像 3
  • Remove the earpiece speaker and front sensor assembly.

  • During reassembly, check the position of the black plastic module containing these components:

  • Proximity sensor

  • Flood illuminator

  • The module must be positioned so that these components are not obstructed by any adhesive.

取下耳机扬声器和前传感器组件。

在重新组装过程中,检查包含这些组件的黑色塑料模块的位置:

接近传感器

泛光照明器

必须正确定位这些模块,这样才不会被任何粘合剂阻塞。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります