メインコンテンツにスキップ

iPhone XS Max Earpiece Speaker and Front Sensor Assembly/이어피스 스피커 및 전면 센서 어셈블리 교체

ご注意:あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

英語
韓国語

手順 5を翻訳中

手順5
iPhone XS Max Earpiece Speaker and Front Sensor Assembly Replacement: 手順 0、 3の画像 1 iPhone XS Max Earpiece Speaker and Front Sensor Assembly Replacement: 手順 0、 3の画像 2 iPhone XS Max Earpiece Speaker and Front Sensor Assembly Replacement: 手順 0、 3の画像 3
  • Working left to right, slide an opening pick beneath the flex cable and underneath the proximity sensor + flood illuminator module.

  • Gently wiggle and lift to separate the module from its notch in the front panel.

  • It's helpful to lift and hold the speaker out of the way for access. Just be careful not to pull on the thin flex cable while you work.

Opening pick/여는 픽을 플렉스 케이블 및 근접 센서 + 플러드 일루미네이터 모듈 밑을 왼쪽에서 오른쪽으로 밀어주세요.

조심히 흔들면서 들어 올려 전면 패널 노치에서 모듈을 분리하여 주세요.

스피커를 들어 올려 치워두면 접근하는데 도움이됩니다. 이 과정에서 얇은 플렉스 케이블을 당기지 않도록 주의하여 주세요.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります