Nintendo Switch ヘッドホンジャックとゲームカードリーダーの交換

英語

日本語

ガイドの前提条件

この翻訳が完了したとみなされる前に、全ての必須条件ガイドを翻訳する必要があります。

Nintendo Switch リアパネルの交換

Nintendo Switch Micro SDカードリーダーの交換

Nintendo Switch シールドプレートの交換

Nintendo Switch バッテリー接続の外し方

Nintendo Switch ヒートシンクの交換

ガイド情報

= 完了 = 不完全

交換する部品は何ですか？

タイトル

はじめに

Follow this guide to replace a damaged or faulty headphone jack and game card reader in the Nintendo Switch game console.

The Switch uses JIS screws, but you can use a Phillips screwdriver in a pinch. Be very careful not to strip the screws. iFixit's Phillips bits are designed to be cross-compatible with JIS-style screws.

***Note:*** Removing the heat sink will make it easier to remove the headphone jack and game card reader, but it’s not required. If you remove the heat sink, be sure to clean off the thermal paste from both components—as well as the CPU—and reapply new paste before you install the shield plate and heat sink.

When you remove the shield plate, you’ll need to replace the thermal compound between the plate and the heatsink. Since normal thermal paste isn’t designed to bridge large gaps, the closest replacement is K5 Pro viscous thermal paste.

***Note:*** This guide, and the part we sell, are compatible with the original Nintendo Switch model released in 2017, as well as the newer refreshed model released in 2019 (model numbers HAC-001 and HAC-001(-01), respectively).

終わりに