メインコンテンツにスキップ

Sostituzione Lettore Schede Micro SD Nintendo Switch

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての19個のガイドに反映されます。

英語
イタリア語

手順 2を翻訳中

手順2
Nintendo Switch Micro SD Card Reader Replacement: 手順 0、 2の画像 1 Nintendo Switch Micro SD Card Reader Replacement: 手順 0、 2の画像 2
  • Use your fingers or a pair of tweezers to lift the microSD card reader straight up from the device to disconnect and remove it.

  • During reassembly, make sure the press connector underneath the foam pad is firmly connected to the motherboard. It may help to remove the foam pad before reinstalling the card reader.

Usa le dita o delle pinzette per sollevare dal dispositivo il lettore di schede microSD e quindi disconnetterlo e rimuoverlo.

Durante il riassemblaggio, verifica che il connettore a pressione sotto il pad in schiuma sia ben connesso alla scheda madre. Può essere utile rimuovere il pad in schiuma prima di reinstallare il lettore.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります