手順 1を翻訳中
手順1
Removing bezel
-
The u3014 monitor opens the same as most other recent Dell monitors.
-
First remove the stand.
-
Remove the bezel. This can be done by hand and a plastic knife. Approaching the screen from behind, peel the bezel with your fingers (photo).
-
The rest follows quite easily, but in the corners you might need to insert a blade or similar to pry open the clips.
-
When removing the bezel, be careful with the control panel (stuck in place with glue, covered with glued-on strip) and power-button (2 screws).
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。