手順 4を翻訳中
手順4
Remove the electronics
-
The black module simply lifts clear of the housing.
-
The clear lid has three clips on each side. Ease these up and lift the clear lid.
-
The PCB lifts clear of the black housing. It is a little reluctant but there are no hidden fasteners. I found it best to slid a flat blade screwdriver down the side of a battery and lever out.
-
Be careful not to apply pressure to the AC tabs, shown in the second picture on the right. They lift clear of the charger connection without assistance.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。