メインコンテンツにスキップ

iPhone 5のLightningコネクターとスピーカーアセンブリの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 3を翻訳中

手順3
iPhone 5 Lightning Connector and Speaker Assembly Replacement: 手順 0、 3の画像 1 iPhone 5 Lightning Connector and Speaker Assembly Replacement: 手順 0、 3の画像 2 iPhone 5 Lightning Connector and Speaker Assembly Replacement: 手順 0、 3の画像 3
  • Remove the Lightning connector and speaker enclosure assembly from the rear case.

  • Take care not to lose the small metal washer on the speaker enclosure, or the four small metal washers beneath the Lightning connector screws.

背面ケースからLightningコネクターとスピーカーを含むアセンブリーを取り出します。

スピーカーに取り付けられた小サイズの座金やLightningコネクターのネジの下に付けられた4つの小さな座金を失くさないようにご注意ください。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります