メインコンテンツにスキップ

iPad 3 4G フロントパネルの取り外し

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての153個のガイドに反映されます。

英語
日本語

手順 22を翻訳中

手順22
Removing iPad 3 4G Front Panel: 手順 0、 2の画像 1 Removing iPad 3 4G Front Panel: 手順 0、 2の画像 2
  • Using one of the opening picks, pry up the bottom right corner of the iPad and grab it with your fingers.

  • Some of the adhesive along the perimeter of the iPad may have stuck back down again. If this is the case, slide a pick underneath the edge of the iPad where the front glass is still stuck and "cut" the adhesive.

開口ピックを1つ使って、iPadの右下角を持ち上げ、指で掴みます。

iPadの周囲沿いの接着剤によって再び接着される場合があります。この場合、フロントガラスが接着剤で固定されているiPad端の下にピックをスライドして、接着剤を"切開"します。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります