メインコンテンツにスキップ

iPhone 5 スクリーンの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 9を翻訳中

手順9
iPhone 5 Screen Replacement, Opening up the phone: 手順 0、 3の画像 1 iPhone 5 Screen Replacement, Opening up the phone: 手順 0、 3の画像 2 iPhone 5 Screen Replacement, Opening up the phone: 手順 0、 3の画像 3
Opening up the phone
  • Do not try to completely remove the front panel assembly from the rear case, as there are several ribbon cables still attached at the top of the iPhone.

  • Once the clips have been released on the bottom and sides of the front panel assembly, pull the bottom of the assembly away from the rear case.

  • Open the display to about a 90º angle, and lean it against something to keep it propped up while you're working on the phone.

  • Add a rubber band to keep the display securely in place while you work. This prevents undue strain on the display cables.

iPhoneの上部は幾つかのリボンケーブルで繋がっているため、背面ケースからフロントパネルを完全に取り外さないでください。

クリップがフロントパネルの下と両サイドから外れたら、アセンブリの下を引っ張り背面ケースから外します。

ディスプレイを90度まで開きます。開いて固定したまま作業するため、後ろに衝立を用意して立てかけてください。

ディスプレイが作業中閉じないように、ゴムを使って衝立に固定してください。これはディスプレイケーブルが過度な力で引っ張られないようにするためです。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります