メインコンテンツにスキップ

iPad Air Wi-Fiモデル 右側アンテナの交換

注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。

英語
日本語

手順 3を翻訳中

手順3
iPad Air Wi-Fi Right Antenna Replacement: 手順 0、 3の画像 1 iPad Air Wi-Fi Right Antenna Replacement: 手順 0、 3の画像 2 iPad Air Wi-Fi Right Antenna Replacement: 手順 0、 3の画像 3
  • The antenna cable is anchored to the speaker with a small metal bracket. The bracket is permanently crimped to the antenna and adhered to the speaker enclosure.

  • Carefully insert an opening pick between the speaker enclosure and the antenna cable bracket.

  • Slide the pick toward the home button to cut the adhesive.

  • Push the bracket away from the speaker until it clears the tape underneath.

アンテナケーブルは小さなメタル製ブラケットによってスピーカーに固定されています。ブラケットは永久にアンテナに圧接されており、内蔵スピーカーに接着剤で留められています。

丁寧に開封ピックを内蔵スピーカーとアンテナケーブルのブラケットの間に差し込みます。

ピックをホームボタン側にスライドさせ、接着剤を切断します。

ブラケットの下に留められたテープが剥がれるまで、スピーカーからブラケットを離します。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります