Protocol Kaptur GPS Motor Replacement

英語

ドイツ語

手順 6を翻訳中

手順6

Remove the motor by unsoldering the cords from the main circuit board.
The motor will either have blue and red cords, or black and white cords, with two of each kind on opposite sides of the drone. It is important that the new motor spins the same direction as the old one, and that you connect the leads to the correct port.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。