メインコンテンツにスキップ

iPhone X 听筒+前传感器组件的替换

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
中国語

手順 2を翻訳中

手順2
iPhone X Earpiece Speaker and Front Sensor Assembly Replacement: 手順 0、 3の画像 1 iPhone X Earpiece Speaker and Front Sensor Assembly Replacement: 手順 0、 3の画像 2 iPhone X Earpiece Speaker and Front Sensor Assembly Replacement: 手順 0、 3の画像 3
  • Beneath the screw you just removed lies a small metal grounding clip. If it didn't already come out along with the screw, remove it now.

  • During reassembly, orient the clip as shown. Hold the clip in position while you install and tighten the screw.

在您刚移除的螺丝下有一个小的圆环金属片。如果刚才拧下螺丝时金属片没有掉下,请将其移除。

重新组装的过程中,请将金属片放平(如图所示),将金属片对准位置并保持住,然后将螺丝从中穿过并拧紧。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります