メインコンテンツにスキップ

iPhone X Ohrhörer-Lautsprecher und Frontsensoreinheit austauschen

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての2個のガイドに反映されます。

英語
ドイツ語

手順 2を翻訳中

手順2
iPhone X Earpiece Speaker and Front Sensor Assembly Replacement: 手順 0、 3の画像 1 iPhone X Earpiece Speaker and Front Sensor Assembly Replacement: 手順 0、 3の画像 2 iPhone X Earpiece Speaker and Front Sensor Assembly Replacement: 手順 0、 3の画像 3
  • Beneath the screw you just removed lies a small metal grounding clip. If it didn't already come out along with the screw, remove it now.

  • During reassembly, orient the clip as shown. Hold the clip in position while you install and tighten the screw.

Unter der eben entfernten Schraube befindet sich ein kleiner Endungskontakt aus Metall. Wenn er nicht schon mit der Schraube herausgekommen ist, dann entferne ihn jetzt.

Setze beim Zusammenbau den Kontakt wie gezeigt ein. Halte ihn in dieser Position fest, während du die Schraube einsetzt und anziehst.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります