G&G TR16 R4 Airsoft Disassembly

英語

イタリア語

手順 20を翻訳中

手順20

first pictures shows all the terms for internals to help with future steps. Note Some parts will look a little different.
Now remove the gears without removing the little washers (or shims as there called in the airsoft industry). Check to see if there are shims left on the bearings and put them back on the gear it came off of.
Warning: Do no misplace the shims as they have very exact placement within the gearbox.
Shimming or the practice of placing shims on each gear can a complicated and tedious process recommend for those with previous airsoft technical experience. G&G AEG Shimming Guide Airsoft guide is avalable if would like to learn this process.
With the gears removed you can now remove the anti-reversal latch and spring. Careful not to loose the anti-reversal latch spring as its small size makes it easy to misplace.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。