手順 16を翻訳中
手順16
-
The next task is to remove the fake bolt.
-
Start by removing the C clip as shown. you may need to use a pick to pry it off.
-
After the clip is remove slide the fake bolt all the way back. With the bolt in the rear position press the fake bolt parts that still attached slightly up.
-
Use a pick to pry the bolt linking section out of the blow back cylinder on both sides.
-
Next remove the retaining strap by using a punch in the little notch shown in Yellow and punch off the retaining strap off the back of the gearbox.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。