メインコンテンツにスキップ

Openingsprocedure

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての23個のガイドに反映されます。

英語
オランダ語

手順 13を翻訳中

手順13
Opening Procedure: 手順 0、 3の画像 1 Opening Procedure: 手順 0、 3の画像 2 Opening Procedure: 手順 0、 3の画像 3
  • Open the iPhone by swinging the display up from the left side, like the back cover of a book.

  • Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPhone's logic board.

  • As pictured, make sure the frame comes off with display and doesn't get stuck in the device.

  • Lean the display against something to keep it propped up while you're working on the phone.

  • During reassembly, lay the display in position, align the clips along the top edge, and carefully press the top edge into place before snapping the rest of the display down. If it doesn't click easily into place, check the condition of the clips around the perimeter of the display and make sure they aren't bent.

Open de iPhone door het scherm van links naar rechts open te klappen, alsof je de achterkant van een boek opent.

Probeer het scherm nog niet volledig los te krijgen, aangezien deze nog steeds aan het logic board van de iPhone verbonden is met een aantal kwetsbare lintkabels.

Zorg dat je, zoals je op de foto kunt zien, het frame inclusief het scherm uit het toestel haalt en voorkom dat het frame in de telefoon blijft hangen.

Laat het scherm op een object leunen, zodat je niet te veel spanning op de kabels zet en je nog steeds aan de telefoon kunt werken.

Tijdens de hermontage breng je het scherm in positie, op één lijn met de klemmen aan de bovenkant, en druk je de bovenkant van het scherm voorzichtig in de klemmen voordat je de rest van het scherm vastklikt. Als het scherm niet goed vastklikt, controleer je de klemmen om zeker te weten dat ze niet gebogen zijn.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります