メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての6個のガイドに反映されます。

英語
中国語

手順 3を翻訳中

手順3
Use the point of a spudger or a clean fingernail to pry the battery connector up from its socket on the logic board. Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion.
  • Use the point of a spudger or a clean fingernail to pry the battery connector up from its socket on the logic board.

  • Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion.

  • Bend the connector slightly away from the logic board to prevent it from accidentally making contact with the socket and providing power to the phone during your repair.

用撬棍的尖端或干净的指甲去撬开电池与逻辑板的连接

尽量不要损伤在逻辑板或其他板周围的黑色硅脂,这是用来加强防水防尘能力的

轻轻挑开那个接口,避免逻辑板意外的连到电池上接通手机的电源

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります