手順 2を翻訳中
手順2
-
After the takedown pin is out of the way, slide the upper receiver forward. You will notice that the charging handle will get caught on a small nub on the top of the gearbox. Simply pull the charging handle back slightly and lift it over the nub.
-
Continue to pull the upper receiver forward until the two halves separate. Do not yank on the wires too hard if they get stuck, just gently guide them out.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。