iRobot Braava 375t Motherboard Replacement

はじめに

The iRobot Braava 375t is a floor mopping and sweeping cleaning robot. The motherboard allows for everything in the device to be connected together. This article shows you how to replace the motherboard, which may be needed if the device doesn't turn on, even after replacing the battery.

必要な工具と部品

手順1 Motherboard

iRobot Braava 375t Motherboard Replacement, Motherboard: 手順 1、 2の画像 1

iRobot Braava 375t Motherboard Replacement, Motherboard: 手順 1、 2の画像 2

Flip device over.
Remove the cleaning cloth compartment on the bottom to access screws.

編集

手順2

Use a Phillips #1 screwdriver to remove the four bottom cover screws.

編集

手順3

Flip the device back over and remove the shell by unplugging the wire that is holding the shell to the motherboard.

編集

手順4

Disconnect the rest of the wires and remove all screws that are attached to the motherboard.
To remove the wires, disconnect the plastic pins in a similar fashion to the ones in the Battery Replacement guide.

編集

手順5

Remove the zip ties holding the wires together using a sharp object or thin scissors.
If you do not have pliers or a wire cutter available, then you can use the heads of thin screwdrivers to wedge the zip ties enough to remove them.

編集