メインコンテンツにスキップ

はじめに

Use this guide to remove or replace the two screws securing the iPhone XS display panel. These are the only screws on the exterior of the iPhone. They use a five-point design that is unique to Apple, requiring a specialty P2 pentalobe driver for removal.

パーツ

パーツは指定されていません。

  1. Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
    • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

    • Power off your iPhone before beginning disassembly.

    • Remove the two 6.9 mm-long pentalobe screws at the bottom edge of the iPhone.

    • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

終わりに

To reassemble your device, follow these instructions in reverse order.

9 の人々がこのガイドを完成させました。

Jeff Suovanen

メンバー登録日: 2013年08月06日

367,695 ポイント

258のガイドは作成済み

チーム

iFixit iFixit人のメンバー

Community

139 メンバー

15,652のガイドは作成済み

2 件のコメント

So you have not explained wether or not the iphone XS and the iphone X have identical pentalobe screws, what a guide it is, well infact i found out the hard way they are identical and replaceable with iphone x housing pentalobe screws, thanks.

Jonez K - 返信

On the screws what is the black stuff at the end of the screws? Because it came off my screws now I’m concerned that I have compromised the waterproof ness of my phone

Casey Hunter - 返信

コメントを追加

統計データを表示:

過去 24時間: 7

過去 7 日: 58

過去 30 日: 192

今までの合計 6,605