メインコンテンツにスキップ

iPhone 7 Speaker Assembly Replacement

必要条件のみ
この修理ガイドは、他のガイドの前提条件として使用されます。それ自体は不完全で、単独で使用されることはありません。

必要な工具と部品

  1. iPhone 7 Speaker Assembly Replacement, Speaker Assembly: 手順 1、 1の画像 1
    • Remove the Phillips screw securing the Wi-Fi diversity antenna to the rear case:

    • One 3.2 mm screw

  2. iPhone 7 Speaker Assembly Replacement: 手順 2、 1の画像 1
    • Remove the following three Phillips screws securing the speaker to the rear case:

    • Two 1.3 mm screws

    • One 2.0 mm screw

  3. iPhone 7 Speaker Assembly Replacement: 手順 3、 3の画像 1 iPhone 7 Speaker Assembly Replacement: 手順 3、 3の画像 2 iPhone 7 Speaker Assembly Replacement: 手順 3、 3の画像 3
    • Use the point of a spudger to lift the two antenna cable connectors up off of the sockets on the logic board.

  4. iPhone 7 Speaker Assembly Replacement: 手順 4、 2の画像 1 iPhone 7 Speaker Assembly Replacement: 手順 4、 2の画像 2
    • Use tweezers to derout the antenna cables from their bracket on the logic board.

  5. iPhone 7 Speaker Assembly Replacement: 手順 5、 2の画像 1 iPhone 7 Speaker Assembly Replacement: 手順 5、 2の画像 2
    • Use tweezers to remove the antenna cables from the clip on the speaker.

    • Make sure to grasp the cable near the clip in order to avoid damaging the cable.

  6. iPhone 7 Speaker Assembly Replacement: 手順 6、 2の画像 1 iPhone 7 Speaker Assembly Replacement: 手順 6、 2の画像 2
    • Use the tip of a spudger to slide the speaker assembly towards the logic board and off of the rear case.

  7. iPhone 7 Speaker Assembly Replacement: 手順 7、 1の画像 1
    • Remove the speaker.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Scott Havard

メンバー登録日: 06/27/16

49,633 ポイント

31のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 284