メインコンテンツにスキップ

iHome IH11 AC Power Adapter Replacement

必要な工具と部品

  1. iHome IH11 AC Power Adapter Replacement, Outer Case: 手順 1、 1の画像 1
    • Unscrew the two 9.0 mm screws with the Phillips #1.

    • Remove the translucent bottom plastic piece.

  2. iHome IH11 AC Power Adapter Replacement: 手順 2、 2の画像 1 iHome IH11 AC Power Adapter Replacement: 手順 2、 2の画像 2
    • Remove the two 9.0mm screws on the back of the iHome with the Phillips #1 screwdriver.

    • Repeat the previous step for the two 9.0mm screws on the bottom.

    • Carefully slide the back cover off. There are wires attached to the back cover.

  3. iHome IH11 AC Power Adapter Replacement: 手順 3、 1の画像 1
    • Remove the aluminum bracket by loosening the two nuts and removing the 8.0mm bolts with your hand.

  4. iHome IH11 AC Power Adapter Replacement, Motherboard: 手順 4、 2の画像 1 iHome IH11 AC Power Adapter Replacement, Motherboard: 手順 4、 2の画像 2
    • Remove the two 12.0mm screws that hold the motherboard with the Phillips #1 screwdriver.

    • Slide the motherboard gently out.

  5. iHome IH11 AC Power Adapter Replacement: 手順 5、 1の画像 1
    • Remove the two 9.0 mm screws with the Phillips #1 screwdriver, then slide the circuit board for the AC adapter out.

    • Repeat the previous step by removing the two 9.0mm screws with the Phillips #1 screwdriver for the circuit board for the on/off switch.

  6. iHome IH11 AC Power Adapter Replacement: 手順 6、 2の画像 1 iHome IH11 AC Power Adapter Replacement: 手順 6、 2の画像 2
    • Unsolder the main connections holding the AC adapter to the circuit board.

    • Solder new adapter in same position with same connections.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

6人の作成者と共同で作成されました。

Nick Knowles

メンバー登録日: 04/19/13

21 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 14-9, Maness Spring 2013 Cal Poly, Team 14-9, Maness Spring 2013人のメンバー

CPSU-MANESS-S13S14G9

5 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 745