メインコンテンツにスキップ

iPad 3 4Gのホームボタンアセンブリの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての11個のガイドに反映されます。

英語
日本語

手順 4を翻訳中

手順4
iPad 3 4G Home Button Assembly Replacement: 手順 0、 3の画像 1 iPad 3 4G Home Button Assembly Replacement: 手順 0、 3の画像 2 iPad 3 4G Home Button Assembly Replacement: 手順 0、 3の画像 3
  • Insert the edge of plastic opening tool underneath the edge of the home button mounting bracket.

  • Slide the plastic opening tool along the retaining spring bracket, releasing the adhesive.

  • Remove the home button with mounting bracket from the front panel.

ホームボタンマウンティングブラケット端の下にプラスチック製開口ツールの先端を差し込みます。

固定スプリングブラケットに沿ってプラスチック製開口ツールをスライドし、接着剤から解放します。

フロントパネルからマウンティングブラケット付きのホームボタンを取り外します。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります