手順 4を翻訳中
手順4
Removing The Wheel
-
The black rubber and plastic wheel is now visible attached to the base of the remote.
-
The left side of the wheel is attached to a small axle that is square in cross section. This axle engages with a device that detects when the wheel is rotated.
-
The right side of the wheel is attached to a much wider axle that operates a micro-switch when the wheel is pressed.
-
The wheel can be removed by pulling sideways on the large axle shown on the right side of the picture. Gently pull it sideways to the right and wiggle it so that the the smaller axle comes out of the rotation detector device..
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。