Bicycle Handlebar Tape Replacement

ガイドに戻る

英語

日本語

前の手順次の手順

手順 4を翻訳中

手順4

Bicycle Handlebar Tape Replacement: 手順 0、 3の画像 1

Bicycle Handlebar Tape Replacement: 手順 0、 3の画像 2

Bicycle Handlebar Tape Replacement: 手順 0、 3の画像 3

Peel off a few feet of the adhesive backing on the roll of new bar tape.
Affix the center of the end of the tape to the edge of the drop bar so that half of the width of the tape hangs over the end of the bar.
Begin to snugly wrap the tape up the handlebar, pulling the tape up and over the handlebar toward the bicycle.
As you wrap, peel off more adhesive backing as needed and overlap each new layer of tape by one half of its width.
When wrapping the tape around curves in the handlebars, allow for more overlap on the inside of the curve and less overlap on the outside of the curve.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。