手順 2を翻訳中
手順2
Inspect controller connections and controller itself.
-
Remove screws, loosen white plastic screw, slide casing end over wires to expose & remove controller. Look for any signs of water or overheat damages. In pic 3 notice the red wire and on the board next to it are two pieces what appears to be bare wires. They are shunts & can be soldered a bit on ends to add output power. DON'T solder all the way!!
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。