メインコンテンツにスキップ

Motorola Droid Pro SD Card/SIM Card PCB Board Replacement

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての4個のガイドに反映されます。

英語
日本語

手順 2を翻訳中

手順2
Motorola Droid Pro SD Card/SIM Card PCB Board Replacement: 手順 0、 3の画像 1 Motorola Droid Pro SD Card/SIM Card PCB Board Replacement: 手順 0、 3の画像 2 Motorola Droid Pro SD Card/SIM Card PCB Board Replacement: 手順 0、 3の画像 3
  • Use a plastic opening tool to open the phone along the sides between the front panel and the chrome trim.

  • It is held together by small clips that lock in. You may have to use extra force to unlock them.

  • Go around on all sides of the phone, unlocking the clips. Then pull the back panel off.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります