メインコンテンツにスキップ

iPhone 4 Verizonのロジックボードの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての10個のガイドに反映されます。

英語
日本語

手順 4を翻訳中

手順4
iPhone 4 Verizon Logic Board Replacement: 手順 0、 1の画像 1
  • Use the edge of a plastic opening tool to disconnect the Wi-Fi antenna cable connector from the logic board.

  • When reconnecting the wifi ribbon connector to the mother board be VERY certain that the round connector at the end of the ribbon cable is centered on its mating half on the motherboard before applying pressure. Failure to do so will likely destroy both halves of the connection.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります