注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての10個のガイドに反映されます。
手順 7を翻訳中
手順7
-
Remove the 3.4 mm Phillips screw near the vibrator motor.
-
Remove the two 3.6 mm standoff screws along the side of the logic board nearest the battery opening.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。